The key to the construction technology of non asphalt self-adhesive rolls is to work from high to low, from far to near, from high to low, and from high to low at the same height. After the surface cleaning of the base layer is qualified, apply a special base treatment agent evenly on the surface of the base layer, with a uniform thickness, no bottom leakage, and no accumulation.
Non asphalt based self-adhesive membrane construction is safe, environmentally friendly, easy to clean, and convenient for civilized construction on site. In addition to the main material, the surface material polyethylene film also has good waterproofing and high strength, so waterproofing has a double guarantee.
But the sequence and direction of non asphalt based self-adhesive film paving should be consistent with the elastic line of the base layer, and then paving and pasting should be carried out in different parts according to the following requirements. Roof: The roll material and base layer are pasted point by point or strip by strip, and all 800mm around the roof are pasted. When the bonding area of the sloping roof exceeds 70%, the rolls should be completely bonded to each other. Basement floor: The roll material and base layer can be fully bonded, point bonded, strip bonded, or laid empty, but the roll material and base layer need to be fully bonded. Installation of basement walls: All materials between the rolls and the base layer, as well as between rolls, should be glued together. The living room should also be waterproof. Underfloor heating and waterproofing: houses in northern regions choose to install underfloor heating equipment
